CONSTRUCTION OF FIRE PITS!
Our pits are made using re-purposed pressure vessel tank heads. These heads were originally designed to cap the ends of propane, air or any kind of pressure tank. The heads we use have failed the pressure test they have to pass so we purchase them as seconds and re-purpose them into fire pits. Being roughly 1/4″ thick steel they are ideal for our purpose. We use roughly 80% recycled, re-purposed or reclaimed products when crafting these pits. The pits are completely welded together as also are our handcrafted line of accessories.
The life expectancy of our fire pits is more than likely longer than you or I.
Why is it the last fire pit you will ever buy? Due to the gauge of the steel we use, our fire pits will last a lifetime. They are far more superior to what you see off the shelf in any big box store.
Why are our fire pits better than building a stone fire pit? Steel will heat up very even and radiate beautifully, whereas stone does not heat up even nor does it radiate. Also, iron pits such as syrup kettles will crack when the heat gets too much. Our pits are also very cost effective compared to building a true stone or masonry pit or purchasing an iron syrup kettle. Finally, you get to take our pit with you when you move or if someone else is having a party, take it over there.
Will my fire pit get hot? Yes steel when heated absorbs and radiates heat which is the beauty of owning a steel fire pit, but yes please don’t touch your fire pit when having fires in it.
Can I put my pit on my deck? Yes, but you must place some pavers or a fire pit mat under your pit. This is the safest way to minimize any heat. The bases are not reaching the burn point of wood which is 450 degrees, but it is better to be safe. Synthetic decks definitely need a set of pavers, although we have not tested our pits on a synthetic deck, you are on your own . Please use your best judgement when placing your Fire Pit. S&S Fire Pits takes no responsibilities for your actions.
Why should I get a snuffer? Snuffers are a cheap insurance policy. They will suffocate a fire in roughly 10 minutes, allowing you to go to bed without worrying and save you time from trying to put the fire out with water, which takes forever.
Will my fire pit or snuffer rust? Yes, all steel will oxidize, therefore causing rust, the surface rust will work like a barrier to protect the thick gauge steel we work with.
The oxidation process is a natural process which is controlled by the environment in which it is in.
By using thick gauge steel, we slow the process down significantly. You may choose to paint your fire pit or snuffer with a high temp paint which will form a bonding layer between the steel and the outside elements, but you may find yourself doing this once a year. Otherwise, you can choose to let the natural process occur and simply leave it alone.
Can I exchange my pit? We allow you to exchange if you want to upgrade. No going down. We also charge $50 to clean a pit if returned for upgrade.
What does my pit come with? All pits come with one of our handcrafted 42” pokers. You can upgrade to one or our decorative pokers for half price when buying a pit. All of our accessories are sold as separate add on pieces.
Can we mix and match? Yes, we can make custom pits if you don’t see anything you like. We can mix handles and bases. We also have a large treasure chest of parts at our shop you can pick from. Please call for more information regarding custom pits. 404-840-8474
What are your Hours? M-F 9-5, Weekends by appointment. Always call before coming. We do a lot of weekend events and some Thursday, Fridays and weekends we are out. Always check our Tour Schedule https://ssfirepits.com/find-us/ for our current show schedule. Our address is 3367 Dogwood Dr. Hapeville, GA 30354. Our shop is located right next door to Arches Brewing which is opening end of year 2015.
How can I pay for my pit? We accept all major credit cards or checks.
Do you have gift certificates? Yes we do and can create one for any dollar amount.